C
Colin Scutter Excellent quality product easy to use 👌
A double-sided leather strop for the final step in sharpening. One face carries green refining compound to remove the last microscopic burr; the smooth cowhide face polishes the edge to a 10,000-grit equivalent finish. Hand-cut vegetable-tanned cowhide on a solid walnut paddle. Use it after your whetstone to keep a working edge keen between full sharpenings.
This is the final step to a truly "scary sharp" knife. If you’ve sharpened your blade on a stone, the Xinzuo Leather Strop Paddle is the secret to taking that edge from just "sharp" to a razor-fine, mirror polish that glides through food.
We’ve made the professional stropping process easy. This double-sided paddle gives you two distinct surfaces for a perfect, polished edge:
Built for a lifetime of use, the solid North American walnut handle provides a stable, comfortable grip, giving you the perfect angle and pressure for consistent results.
Pair this strop with a 1000/6000 water stone. Use the stone for shaping and honing, then finish on this strop for a razor-ready edge on all your favorite knives.
Your sharpening accessory arrives ready to use. The leather strop comes pre-loaded with green polishing compound on one side.
This is the final step to a truly "scary sharp" knife. If you’ve sharpened your blade on a stone, the Xinzuo Leather Strop Paddle is the secret to taking that edge from just "sharp" to a razor-fine, mirror polish that glides through food.
We’ve made the professional stropping process easy. This double-sided paddle gives you two distinct surfaces for a perfect, polished edge:
Built for a lifetime of use, the solid North American walnut handle provides a stable, comfortable grip, giving you the perfect angle and pressure for consistent results.
Pair this strop with a 1000/6000 water stone. Use the stone for shaping and honing, then finish on this strop for a razor-ready edge on all your favorite knives.
THE FINISHING STEP
Stropping is what separates a sharp edge from a polished one. The green-compound side refines and strips away the final burr left by the stone. Flip to the smooth vegetable-tanned cowhide and you bring the edge to a 10,000-grit equivalent polish. A 205mm by 65mm working surface gives you room to draw the full length of a chef's knife in a single pass.
In stock. Ships from Australia.
WHY STROP
A whetstone sets the edge. A strop maintains it. Drawing the blade backwards across the leather realigns and polishes the apex without removing steel, so a few passes after each session keeps the edge keen and pushes the next full sharpening further out. Mounted on an 18mm solid walnut paddle for a stable, flat platform that sits steady on the bench.
Specification
HOW TO USE
Start on the green-compound side to refine the edge straight off the whetstone. Lay the blade flat, then lift the spine to match your edge angle, and draw the knife backwards (spine-leading) along the leather. Five to ten light passes per side. Then move to the smooth cowhide face for the final polish. Always pull away from the edge, never into it. A handful of passes between sharpenings keeps a working knife at its best.
CARE
Store the strop flat and dry, away from direct heat and damp. Re-charge the compound side as the green dressing wears thin. Leave the smooth cowhide face bare for polishing. Wipe off steel swarf occasionally and the leather will last for years. Covered by Xinzuo Australia's lifetime warranty against manufacturing defects.
FAQs
A strop is the final step in sharpening. It refines and polishes the edge after a whetstone, removing the last microscopic burr and bringing the apex to a mirror finish, without grinding away steel.
One face is pre-loaded with green refining compound to strip the final burr off a freshly sharpened edge. The other is smooth vegetable-tanned cowhide that polishes to a 10,000-grit equivalent. You work coarse to fine across the two sides.
No. The stone does the actual sharpening; this strop maintains and polishes that edge. Use it after the stone and between sharpenings to keep a knife keen for longer.
Match your edge angle, then draw the blade backwards (spine-leading) along the leather, pulling away from the edge. Never push the edge into the leather. Five to ten light passes per side is plenty.
The leather working surface is 205mm long by 65mm wide, on a paddle 340mm long overall and 18mm thick. There is room to draw a full chef's knife in one stroke.
Hand-cut, vegetable-tanned cowhide mounted on a solid North American walnut paddle. The whole tool weighs 235g.
Re-charge the green-compound side when the dressing wears thin and stops cutting. Leave the smooth cowhide face bare, as it polishes on its own.